Max Pressure: 350 bar
Max Flow: 100 lpm for DC, 90 lpm for AC valves – check 41 150/108 ED data sheet for maximum limits and pressure drops depending on spool selection.
Weight:1.5/2.00 Kg for single/double solenoid valves
Installation position: Any
Ambient Temperature Range: -20 to +50°C for standard NBR seal option
Maximum Pressure:350 bar on ports P, A and B, and 210 bar on T port of DC valves, 160 bar on T port of AC valves
Working fluids: Use mineral oil-based hydraulic fluids HL or HM type, according to ISO 6743-4. For these fluids, use NBR seals (code N). For fluids HFDR type (phosphate esters) use FPM seals (code V). For the use of other fluid types such as HFA, HFB, HFC, please consult our Technical Team: firstname.lastname@example.org. Using fluids at temperatures higher than 80 °C causes a faster degradation of the fluid and of the seals characteristics. The fluid must be preserved in its physical and chemical characteristics.
Fluid temperature range: -20 to +80°C
Maximum admissibile degree of contamintation according to ISO 4406 :1999 Class 20/18/15
Available voltages: 12, 14,24,28,4810, 220 VDC, 24,48,10,230 VAC 50/60Hz
Voltage tolerance: +/- 10%
Power Consumption: See datasheet 41 150/211 ED
Delivery Information and Returns Policy
Delivery Information :
Delivery charges apply.
If you require International Delivery charges will apply and you will need to contact email@example.com to process your order.
Delivery will be Next Working Day wherever possible if the order is made before 4pm or 2pm for any order of oil. Please allow up to 7 working days for any orders of 205 litre/45 gallons barrels of oil or 1000L IBCs.
You are entitled to cancel your order and return the product to any division of Group HES within 7 working days from delivery date. After this date, it will be at the discretion of management to decide whether a refund or exchange will be given. A full refund is available if the item is unused, undamaged and in the original packaging. The item must not contain any fluids, including water, oil etc.
An average 20% (percentage may vary), handling charge will be applicable unless the part is faulty or incorrectly described. Any shipping costs will not be refunded.
If you need to return an item, please contact firstname.lastname@example.org immediately with your order number and reason for return.
Please allow up to 30 days for refunds to be applied or alternatives to be resent out. The company reserves the right to assess whether there is any consumer error involved and will take this into account when refunds are granted.
Your statutory rights are not affected.
These terms are subject to change so do check back regularly.
If you need to return an item due to warranty reasons - please refer to our Terms and Conditions and contact email@example.com or call 01452 730 774.