Divisions menu Account menu
 

Bearing Strip - Type 506

Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured to very tight tolerances and providing bearing solutions for reciprocating, oscillating and slow rotary movement applications, Hallite 506 bearing strip is used in many of today’s most arduous hydraulic applications around the world. Commonly fitted in reciprocating cylinders as rod and piston bearings, Hallite 506 is capable of withstanding extreme side-loads preventing metal to metal contact. The material’s design incorporates micro indentations on the bearing strip’s surface to trap fluid and provide built-in lubrication to the bearing. The 506 bearing strip is manufactured by a patented process, using a woven fabric reinforced polyester resin material and is proven to be compatible with a wide range of fluids, including mineral oils, water based fluids and phosphate esters, to produce a rectangular section strip which is available in a wide range of inch and metric sizes including cross sections specified in ISO 10766.These Hallite bearing strips type 506 are available to buy online from Hydraulic Equipment Supermarkets - your approved Hallite supplier, if the bearing strip you need is not listed please contact HES on: 01452 730774 or email: enquiries@hydraulicequipment.net
Ordering Description Price Quantity
130mm ID 135mm OD 15mm Hsg
Bearing Ring
with free UK delivery
Call for pricing
+ VAT
15mm Groove Width 2.5mm Section
Bearing Strip (sold per mm)
with free UK delivery
Call for pricing
+ VAT
9.7mm groove width 2.5mm section
Bearing Strip (sold per mm)
with free UK delivery
Call for pricing
+ VAT
5.6mm groove width 2.5mm section
Bearing Strip (sold per mm)
with free UK delivery
Call for pricing
+ VAT

See Download Tab for data sheet

 

For more information email enquiries@grouphes.com or call 01452 730774

Delivery Information and Returns Policy

Delivery Information :

Delivery charges apply.

If you require International Delivery charges will apply and you will need to contact enquiries@grouphes.com to process your order. 

Delivery will be Next Working Day wherever possible if the order is made before 4pm or 2pm for any order of oil.  Please allow up to 7 working days for any orders of 205 litre/45 gallons barrels of oil or 1000L IBCs. 

 

Returns policy:

You are entitled to cancel your order and return the product to any division of Group HES within 7 working days from delivery date.  After this date, it will be at the discretion of management to decide whether a refund or exchange will be given. A full refund is available if the item is unused, undamaged and in the original packaging. The item must not contain any fluids, including water, oil etc.

An average 20% (percentage may vary), handling charge will be applicable unless the part is faulty or incorrectly described. Any shipping costs will not be refunded.  

If you need to return an item, please contact admin@grouphes.com immediately with your order number and reason for return.

Please allow up to 30 days for refunds to be applied or alternatives to be resent out. The company reserves the right to assess whether there is any consumer error involved and will take this into account when refunds are granted.

Your statutory rights are not affected.

These terms are subject to change so do check back regularly. 

If you need to return an item due to warranty reasons - please refer to our Terms and Conditions and contact admin@grouphes.com or call 01452 730 774.